Tank Volume Calculator

Total volume of a cylinder shaped tank is the area, A, of the circular end times the length, l. A = πr² where r is the radius which is equal to 1/2 the diameter or d/2. Therefore:
V(tank) = πr²l

Calculate the filled volume of a horizontal cylinder tank by first finding the area, A, of a circular segment and multiplying it by the length, l.

Area of the circular segment, the grey shaded area, is A = (1/2)r²(θ - sinθ) where θ = 2*arccos(m/r) and θ is in radians.  Therefore, V(segment) = (1/2)r²(θ - sinθ)l.  If the fill height f is less than 1/2 of d then we use the segment created from the filled height and V(fill) = V(segment).  However, if the fill height f is greater than 1/2 of d then we use the segment that is created by the empty portion of the tank and subtract it from the total volume to get the filled volume; V(fill) = V(tank) - V(segment).

Total volume of a cylinder shaped tank is the area, A, of the circular end times the height, h. A = πr² where r is the radius which is equal to d/2. Therefore:
V(tank) = πr²h

The filled volume of a vertical cylinder tank is just a shorter cylinder with the same radius, r, and diameter, d, but height is now the fill height or f.  Therefore:
V(fill) = πr²f

Total volume of a rectangular prism shaped tank is length times width times height. Therefore,
V(tank) = lwh

The filled volume of a rectangular tank is just a shorter height with the same length and width.  The new height is the fill height or f.  Therefore:
V(fill) = lwf

Volume of an oval tank is calculated by finding the area, A, of the end, which is the shape of a stadium, and multiplying it by the length, l.  A = πr² + 2ra and it can be proven that r = h/2 and a = w - h where w>h must always be true.  Therefore:
V(tank) = (πr² + 2ra)l

Volume of fill of a horizontal oval tank is best calculated if we assume it is 2 halves of a cylinder separated by a rectangular tank.  We then calculate fill volume of 1) a Horizontal Cylinder Tank where l = l, f = f, and diameter d = h, and 2) a Rectangle Tank where l = l, f = f, and rectangle width w is a = w - h of the oval tank.
V(fill) = V(fill-horizontal-cylinder) + V(fill-rectangle)

To calculate volume of an oval tank find the area, A, of the end, which is the shape of a stadium, and multiply it by the length, l.  A = πr² + 2ra and it can be proven that r = w/2 and a = h - w where h>w must always be true.  Therefore:
V(tank) = (πr² + 2ra)l

To calculate fill volume of a vertical oval tank it is best if we assume it is 2 halves of a cylinder separated by a rectangular tank. With r = w/2 = height of the semicircle ends, we can define 3 general fill position areas.

• Fill, f < r
  We calculate fill volume using the circular segment method, as in a Horizontal Cylinder Tank, for the filled portion.
• Fill, f > r and f < (r+a)
  The filled volume is exactly 1/2 of the cylinder portion plus the volume of fill inside the rectangular portion.
• Fill, f > (r+a) and f < h
  We calculate fill volume using the circular segment method, as in a Horizontal Cylinder Tank, for the empty portion.  Volume will be V(tank) - V(segment).

We treat a capsule as a sphere of diameter d split in half and separated by a cylinder of diameter d and height a.  Where r = d/2.
V(sphere) = (4/3)πr³, and
V(cylinder) = πr²a, therefore
V(capsule) = πr²((4/3)r + a)

Volume of fill for a horizontal capsule is done by using the circular segment method for the Horizontal Cylinder and, with a similar approach, using calculations of a spherical cap for the sphere section of the tank where,
V(spherical cap) = (1/3)πh²(3R - h)

To calculate the volume of a vertical capsule tank treat the capsule as a sphere of diameter d split in half and separated by a cylinder of diameter d and height a.  Where r = d/2.
V(capsule) = πr²((4/3)r + a)

To calculate fill volume of a vertical capsule calculate in a fashion similar to the method used for the Vertical Oval Tank where r = d/2 = height of each hemisphere end.

• Fill, f < r
  We calculate fill volume using the spherical cap method, for the filled portion.
• Fill, f > r and f < (r+a)
  The filled volume is exactly 1/2 of the sphere portion plus the volume of fill inside the vertical cylinder portion.
• Fill, f > (r+a) and f < h
  We calculate fill volume using the spherical cap method for the empty portion.  Volume will be V(tank) - V(spherical cap).

Horizontal 2:1 Elliptical with 2:1 semi elliptical tank heads

Horizontal Dish Ends with dish only tank heads